苜蓿秸秆压缩仿真离散元模型参数标定

为了提高苜蓿秸秆压缩过程中离散元仿真研究所用参数的准确度,该研究采用物理试验和仿真优化设计相结合的方法对离散元仿真参数进行标定。首先,以接触参数物理试验结果为仿真参数选择依据,利用Plackett-Burman试验对初始参数进行显著性筛选,方差分析结果表明,苜蓿秸秆-苜蓿秸秆静摩擦系数、苜蓿秸秆-苜蓿秸秆滚动摩擦系数、苜蓿秸秆-45钢静摩擦系数对仿真休止角影响显著。进一步以休止角的相对误差值为评价指标,对3个显著性参数进行最陡爬坡试验,优化显著性参数取值范围,并基于Box-Behnken试验建立休止角与显著性参数的二阶回归模型,以物理试验得到的38.88°休止角为目标值,对显著性参数进行寻优,得到最优组合:苜蓿秸秆-苜蓿秸秆静摩擦系数为0.45、苜蓿秸秆-苜蓿秸秆滚动摩擦系数为0.08、苜蓿秸秆-45钢的静摩擦系数为0.54。最后利用T检验得到P0.05,表明仿真休止角与物理试验值无显著性差异,验证了最优参数组合的可靠性。研究结果表明,应用上述各优化试验来标定离散元仿真参数是可行的,同时标定的参数可为苜蓿秸秆的其它仿真试验提供参考。     

稻麦联合收获机分段式脱粒装置设计与优化

针对纵轴流联合收获机在收获稻麦时出现的脱粒不彻底、分离不完全等问题,该研究设计了一种分段式纵轴流脱粒分离装置。该装置主要由锥形脱粒滚筒、脱粒强度可调式凹板筛、360°分离式凹板筛、作业参数电控调节系统等构成。通过单因素试验,分别获得了脱粒强度可调式凹板筛的开关板针对小麦和水稻脱粒的最佳开关状态。为寻求装置作业参数对脱粒效果的影响规律及最优参数组合,进行了多目标优化试验。以滚筒转速、导流板角度、凹板筛脱粒间隙、凹板筛分离间隙及喂入量作为影响因素,以破碎率、损失率、脱出物含杂率为试验指标,建立了破碎率、损失率、脱出物含杂率的数学模型。试验结果表明:各因素对破碎率影响的显著性大小顺序为滚筒转速、凹板筛脱粒间隙、导流板角度、喂入量、凹板筛分离间隙;对脱出物含杂率影响的显著性大小顺序为滚筒转速、导流板角度、凹板筛脱粒间隙、喂入量、凹板筛分离间隙;对损失率影响的显著性大小顺序为滚筒转速、导流板角度、凹板筛脱粒间隙、喂入量、凹板筛分离间隙。通过多目标参数优化分析,确定装置进行小麦脱粒的最优作业参数组合为脱粒滚筒转速905 r/min、导流板角度69°、凹板筛脱粒间隙18 mm、凹板筛分离间隙19 mm、喂入量4 kg/s。在该参数组合条件下进行了田间验证试验,结果表明,与常规纵轴流脱粒装置相比,整机作业破碎率由1.46%降为1.00%,含杂率由1.85%降为1.43%,损失率由1.72%降为1.20%,各指标实测值与模型优化值的相对误差均小于5%,满足国家相关标准要求。该装置有效解决了破碎率高、脱粒不干净、分离不彻底的问题,研究结果可为纵轴流联合收获机脱粒装置的结构改进和作业参数优化提供参考和依据。     

基于DTW距离的拖拉机传动轴载荷样本长度计算方法

针对工程领域载荷样本长度确定方法对农业机械载荷适用性较差的问题,提出了一种基于动态时间扭曲(DTW,Dynamic Time Warping)距离计算载荷样本长度的方法。首先,运用无线扭矩传感器获取犁耕作业下拖拉机传动轴的动态载荷,结合传动轴犁耕作业下的载荷特点,划分作业工况;再将作业循环叠加并经过归一化处理后进行DTW距离计算,确定传动轴载荷样本长度;最后,计算参数外推中均值混合正态分布函数的拟合参数相对误差。结果表明,运用DTW距离方法确定的载荷样本长度,能够使均值双正态分布函数拟合得到的参数相对误差保证在10%以内。近似均值精度估计法和均值曲线拟合法的拟合参数相对误差最大值分别为126.06%和80.62%,而基于DTW距离计算方法的拟合参数相对误差最大值为5.43%,验证了基于DTW距离的载荷样本长度计算方法的适用性。研究结果可为拖拉机传动轴田间试验载荷样本长度确定提供参考。     

基于WSN的集中通风式分娩猪舍环境参数时空分布特性

为研究集中通风式分娩猪舍环境参数的时空分布特性,以云南省某规模化种猪场为试验对象,利用无线多源多点远程监测系统(Wireless Sensor Network, WSN),对地沟管道进风、中央排风式分娩母猪舍养殖环境开展了环境参数监测试验,并进行统计分析。试验结果表明,在试验期间内,分娩舍内不同时间段之间的温度(00:00-06:00、06:00-12:00、12:00-18:00以及18:00-00:00的平均温度分别为22.98、23.78、24.44和23.61℃)具有显著性差异(P0.05),相对湿度与温度随时间变化呈现负相关性,相对湿度的峰值点为82.31%,温度场分布均匀性比湿度场好,NH_3浓度分布均匀性比CO_2浓度差。NH3浓度在舍内能被有效的维持在低水平范围,各监测区域的浓度远小于指标值(20 mg/m~3),NH_3和CO_2会呈现出在边角积聚现象。温湿度指数较低,舍内平均温湿度指数(Temperature-humidity Index,THI)水平的峰值点为75.30,生猪出现热应激的概率较低。利用WSN系统,对集中通风式分娩舍环境参数进行多源多点远程监测,分析分娩舍环境参数时空分布特性,为分娩舍通风模式与环境调控策略优化设计提供参考。     

Impact of High Night‐Time and High Daytime Temperature Stress on Winter Wheat

High temperature is a major environmental factor that limits wheat (Triticum aestivum L.) productivity. Climate models predict greater increases in night‐time temperature than in daytime temperature. The objective of this research was to compare the effects of high daytime and high night‐time temperatures during anthesis on physiological (chlorophyll fluorescence, chlorophyll concentration, leaf level photosynthesis, and membrane damage), biochemical (reactive oxygen species (ROS) concentration and antioxidant capacity in leaves), growth and yield traits of wheat genotypes. Winter wheat genotypes (Ventnor and Karl 92) were grown at optimum temperatures (25/15 °C, maximum/minimum) until the onset of anthesis. Thereafter, plants were exposed to high night‐time (HN, 25/24 °C), high daytime (HD, 35/15 °C), high daytime and night‐time (HDN, 35/24 °C) or optimum temperatures for 7 days. Compared with optimum temperature, HN, HD and HDN increased ROS concentration and membrane damage and decreased antioxidant capacity, photochemical efficiency, leaf level photosynthesis, seed set, grain number and grain yield per spike. Impact of HN and HD was similar on all traits. Greater impact on seed set, grain number and grain yield per spike was observed at HDN compared with HN and HD. These results suggest that HN and HD during anthesis cause damage of a similar magnitude to winter wheat.     

彭水县烟叶化学成分协调性不同年份间变异分析

为掌握重庆市彭水县烟叶协调性的时间变异特征,对2005—2014年上(B2F)、中(C3F)、下(X2F)部烟叶的协调性指标进行分析。结果表明:在彭水烟区烟叶钾氯比和两糖差变异系数较大,两糖比年度间变异最小,而其他化学成分含量的变异幅度在30%以内。从不同年份部位间变异来看,各化学成分及协调性指标均有逐渐稳定的趋势。从不同部位间对比来看,上部叶各化学成分协调性指标年度间变异总体上大于中、下部叶。     

多层胶合板热压传热特性

为了研究多层胶合板热压过程中各胶层温度随时间的变化规律，进行了热压传热试验。结果表明，单板层数是影响胶合板热压传热传质的重要因素。多层胶合板坯中心胶层升温速率随着板坯层数的增加而显著下降，单板层数从3层增加到9层，中心胶层到达胶黏剂固化温度的时间增加了383％。在慢速升温阶段，板坯中心胶层的水分汽化温度随着板坯层数的增加而有所降低。     

不同采收期对余甘果实品质和耐贮性的影响

以福建余甘主栽品种‘粉甘’果实为材料，研究不同采收期对余甘果实品质和耐贮性的影响。结果表明：随着采收期的延迟和果实成熟度的提高，余甘果皮颜色由青绿色逐渐变成黄绿色，果核颜色由深绿色变成棕褐色，果实重量和大小逐渐增加，果实可食率和营养品质提高。可用果实重量和大小、果形指数、果实可溶性固形物、可滴定酸、维生素C含量、果实可食率作为确定余甘果实采收成熟度的参数。同时，不同采收期对余甘果实的耐贮性影响不同，盛花期后179 d采收的果实耐贮性最好，在常温25±1℃下贮藏16 d后，好果率为91%，失重率为3.51%。     

A rapid extensigraph protocol for measuring dough viscoelasticity and mixing requirement

The extensigraph is particularly useful in characterizing dough viscoelastic properties; however, testing throughput for standard method is low due to the prerequisite for farinograph water absorption, long dough resting and milling to prepare large amounts of flour. Therefore, a rapid extensigraph method was developed that reduced sample size (165 g wheat) for milling and more than tripled throughput. Wheat is milled in Quadrumat Junior mill with a modified sieving system. The resulting flour (100 g) was mixed with a pin mixer at constant water absorption to allow the evaluation of wheat genotypes at the absorption level they are expected to perform. Dough was subsequently stretched by an extensigraph after 15 min of floor time and 30 min resting. Strong correlations for extensigram R_max (r > 0.93), extensibility (r > 0.64) and area (r > 0.88) were found for the proposed method compared to the standard method. Mixing parameters (time and energy) obtained during dough preparation provided further information about dough strength and mixing requirement. By significantly reducing sample size requirement and increasing testing throughput, this rapid extensigraph method can be widely adopted in milling and baking industry and meets the need for a fast evaluation of dough strength in breeding trials.     

Detection and quantification of Aeromonas salmonicida in fish tissue by real‐time PCR

Furunculosis, a septicaemic infection caused by the bacterium Aeromonas salmonicida subsp. salmonicida, currently causes problems in Danish seawater rainbow trout production. Detection has mainly been achieved by bacterial culture, but more rapid and sensitive methods are needed. A previously developed real‐time PCR assay targeting the plasmid encoded aopP gene of A. salmonicida was, in parallel with culturing, used for the examination of five organs of 40 fish from Danish freshwater and seawater farms. Real‐time PCR showed overall a higher frequency of positives than culturing (65% of positive fish by real‐time PCR compared to 30% by a culture approach). Also, no real‐time PCR‐negative samples were found positive by culturing. A. salmonicida was detected by real‐time PCR, though not by culturing, in freshwater fish showing no signs of furunculosis, indicating possible presence of carrier fish. In seawater fish examined after an outbreak and antibiotics treatment, real‐time PCR showed the presence of the bacterium in all examined organs (1–482 genomic units mg^?1). With a limit of detection of 40 target copies (1–2 genomic units) per reaction, a high reproducibility and an excellent efficiency, the present real‐time PCR assay provides a sensitive tool for the detection of A. salmonicida.